IOGear GUW2015V Appendix

I. Compatibility with IOGEAR GUWH104KIT

Important: To retain the functionality of both the Wireless VGA kit and the GUWH104KIT, you MUST follow

these steps:

Uninstall the GUWH104KIT software by using Add/Remove Programs or Programs and Features on 1.

the Control Panel. Please select and remove “Ultrasuite with WiCenter Basic”. The Wireless VGA kit

installer will not allow you to proceed until this software is removed.

Complete the installation of the Wireless VGA kit as shown in the Wireless VGA Software Installation 2.

section.

Install the GUWH104 software “Driver Hub Only” for your Wireless USB Hub from IOGEAR 3.

website. Please make sure that you are in the correct product page.

http://www.iogear.com/support/dm/driver/GUWH104#display

Use the Wireless USB Host Adapter (GUWA200) that comes with this kit to communicate with your 4.

Wireless USB Hub.

Note: After this upgrade, the Wireless USB Host Adapter (GUWA100U) will not function with the

Wireless VGA Adapter (GUW2015V) or the Wireless USB Hub (GUWH104) on the PC system

where the GUW2015VKIT software has been installed. However you may use this Wireless USB

Host Adapter (GUWA100U) on a different PC.

For more support information, please contact IOGEAR.

Appendix