IOGear GUB211, M1327 manual Set Up the Control Center Application, Important Note, Windows

Set Up the Control Center Application

Important Note:

The IOGEAR Auto Printer Sharing Switch application needs to be activated on your computer in order for the switch to function.

Windows

1.After installation, you will see an icon “IOGEAR Auto Printer Sharing Switch” placed on your desktop. Double click on the icon to launch the application.

2.When the application window shows up, you will be able to select the printer that’s already setup on your computer from the drop-down list by clicking on the down arrow. Click on

OK to confirm your selection. Make sure you select the correct printer on both computers that are connected to the GUB211.

19