underneath the platter. See SETUP INSTRUCTIONS for detailed
information on installing the Motor Drive Belt.
6.
Start/Stop Buttons: These buttons start and stop the turntable
motor. Both buttons have the same function. If they seem to not be
functioning, check to make sure that the Motor Drive Belt is properly
installed in the SETUP INST RUCTIONS.
7.
1/8” Stereo Line Input: Con nect Tape Player s, Re el to Reel, or any
other audio source h ere. This signal i s sent to the comput er through
the USB. Make sure that your phono cartridge is installed while
using this input for maximum sound quality. Also make sure
that your RCA jacks are either pl ugged into an input device or not i n
contact with metal.
Note: The 1/8" audio input is not routed to the turntable's RCA
output jacks, only t o your computer vi a USB.
8.
33 and 45 RPM Buttons: These buttons control the RPM of the
turntable platter. A red LED indicates which RPM mode has been
selected.
NOTE: If the turntable is powered down while in the 45 RPM setting,
it will return to 33 RPM when it is powered up.
Note: You can record your 78RPM records by recording them at 33 or
45rpm, then changing them to 78 in the Audacity software.
9.
Pitch LED: This LED illuminates green when the pitch slider is set at
0%. When the pitch slider is moved away from zero, the LED
illuminates red.
10.
Pitch Slider: This slide control allows the pitch to be increa se d or
decreased by 10%. In the center posit ion the pitch is at 0%. When
moved away from the ce nter and towards the t one arm decreases the
pitch (slows down the platter) and moving the pitch slider away from
the tone arm increase the pitch (sp eeds up the platter.)
TONE ARM: Items 11 – 15 are all parts of the tonearm. Refer to the
TONEARM SETUP secti on for additional detail s on these controls. Y our
model will be equipped with straight arm or S-arm style depe nd in g
upon model purcha sed.
11.
Counter Weight and Sca le Ring: The Counterweigh t is used to
balance the head shell and cartrid ge assembly so that the proper
amount of stylus pressure is appli ed to the record.
12.
Anti-Skate Adjustment: This knob is used to compensate for inward
tracking forces. See TONEARM SETUP for more details.
13.
Arm Clip: This specially designed arm clip secures the tone arm while
at rest or when not in use. The arm clip has been designed to remain
in the up position while unlocked.
NOTE: When transporting the turntable, it is always recommended
that the headshell be removed and the arm clip secured to prevent
tonearm or turntable damage.
14.
Tone Arm Lock Nut: This Alum i n u m nut is us e d t o s ec ur e t he he ad
shell and cartridge assembly to the tone arm tube. See Cartridge
Setup for more details.
15.
Cartridge and Headshell: The cartridge is pre-mounted on a
standard headshell. The cartridg e is user replaceable and compatibl e