1.
Begin by rotating the counterweig ht clockwise until it is in the
complete forward position (NOTE: this is also the maximum amount
of pressure that can be applied to t he cartridge.)
2.
Now there should be a feeling of wei ght and resistance when the head
shell is raised and lowered. Begin rotating the counterweight counter-
clockwise (away from the pivot point) until the weight and resistance
feeling is gone. If done properly, the t one arm will pivot with very
little resistance back and forth indicating that there is exactly 0 grams
of stylus pressure.
3.
With the counterweight in its ne w po sit i o n furt h er aw ay fr om t o ne
arm pivot point, grasp the scale ri ng of the counter weight and rotat e
it until "0" is in the vertical posit ion.
4.
Finally, rotate the counterweight (and scale ring) clockwise (towards
the pivot point) until the desired amount of weight is reached. If the
scale rotates 360 degrees beyond the zero point, the new scale ring
reading should be added to 3.5.
*The included head shell and cartr i dge asse mbly requires a minimum
of 3 grams and no more than 5 grams for o ptimum performance.