GENERAL CONTROLS
5 |
|
| 9 |
| 4 |
| 8 |
7 | 6 |
4.Platter: This platter must be securely fastened to the turntable prior to operation. The Motor Drive Belt can be found on the drive ring underneath the platter.
5.45 RPM Adapter Holder: Holds the included 45 RPM adapter. When not using the adapter, please place it in this holder.
6.Stop Button: This button stops the turntable motor.
7.33 / 45 RPM Button: This button controls the RPM of the turntable platter.
IMPORTANT
Make sure that the slipmat is always placed on top of the platter while using the turntable. Failure to use the slipmat may cause damage to your media as well as damage to the turntable.
Remove the plastic cartridge cover (needle cover) before operating the turntable.
8.Arm Clip: This specially designed arm clip secures the
tone arm while at rest or when not in use. The arm clip has been designed to remain in the up position while unlocked.
9.Raise / Lower Lever – Raises and lowers the tonearm.
3
