Introduction
With the iE1300 Electronic Eyepiece now you can experience
Parts List
•iE1300 Electronic Eyepiece
•USB Cable
•Instruction manual for download from iOptron website
System Requirement
•Windows 2000/XP/VISTA/7
•Pentium IV 1.4GHz or equivalent, or high
•300 MB free hard drive space for program installation and image/movie saving
•512 MB RAM (1.0 GB DDR RAM recommended)
•
•DirectX 9.0C or higher
iE1300 Driver Installation
The iE1300 is a
The camera is ready for use after the driver is installed.
Image Capture Software Installation
In order to bring an object to your computer monitor, an image/video capture program is needed. Most PCs come with preinstalled programs, such as Window Movie Maker, Arcsoft Webcam Companion, or other webcam program. If your PC does not have one installed, you may download one from the following website: VirtualDub
Use iE1300
The iE1300 can be used with almost any telescope that is compatible with 1.25" format eyepieces. The camera is inserted into a focusing tube in the same way as a standard eyepiece, with or without a diagonal if you use a star diagonal. If your telescope does not have enough inward focus travel, you will need to use an 1.25" Barlow lens (not included) to extend the telescope’s focal plane to the camera’s imaging plane.
Aim and focus your telescope to an observing target using a regular eyepiece. Always start with a large number eyepiece, such as a 25mm one. Remove the eyepiece and insert the iE1300 camera into the telescope focuser. Slowly adjust the focuser knob to bring the image to focus. Use the capture function of the program to capture the image or movie. Practice your system during the daytime first.
2