IPSO 120, 170 - page 4

Tumblers – 120 and 170

4-08-45

TMB1298N

1Serial Plate

TMB1298N

120 POUND TUMBLER

170 POUND TUMBLER

Conversion Table

Multiply By To Obtain Multiply By To Obtain

Btu 0.252 kCal Pounds/sq. inch 0.06895 Bars

Btu 1055 Jou les Pounds/sq. inch 0.070 kg/sq. cm

Inch 25.4 Millimeters Pounds (lbs.) 0.454 Kilograms

Inches W.C. 0.036 Pounds/sq. inch Boiler Horsepower 33,479 Btu/hr.

Inches W.C. 0.249 kPa Boiler Horsepower 34.5 lbs. steam/hr.

lb./inch2 (psi) 6.895 kPa CFM 0.471 liters/second

ft.328.32 Liters kW 3414 Btu/hr.

Contents

Main Table of Contents Tumblers 120 and 170 Introduction Model Identification Page Specifications and Dimensions 120 Pound Tumbler Dimensions and Exhaust Outlet Locations Refer to Position and Level the Tumbler to temporarily reduce the heights of these models. 170 Pound Tumbler Dimensions and Exhaust Outlet Locations Refer to Position and Level the Tumbler to temporarily reduce the heights of these models. Electric and Gas Connection Locations for Gas Models NOTE: These figures are approximate dimensions only. Electric and Steam Connection Locations for Steam Models Installation Pre-Installation Inspection Tumblers 120 and 170 10 Tumbler Enclosure Figure 1 Exhaust Requirements Layout Make-Up Air WARNING Individual Venting Page Manifold Venting Page Page Electrical Requirements