Iqua Bluetooth Headrest Handsfree manual Getting Started, Installation, Charging the battery

Models: Bluetooth Headrest Handsfree

1 18
Download 18 pages 21 Kb
Page 7
Image 7
Getting Started

Getting Started

EN

Installation

To install the Iqua Snake on the headrest of your car seat, start gently sliding it from either side so that it wraps around the bars on the headrest. You may also use the tightening strap to ensure that the Snake is well attached.

Charging the battery

Before you use the Snake, you must charge its battery for approximately 6 hours. Once the battery is full, it will provide up to 10 hours of talk time and up to 10 days of standby time.

1.Connect the charger cable to the Snake.

2.Plug the car charger into the cigarette lighter of your car. A red light will turn on.

3.When the battery is fully charged, the red light will turn off.

Switching on and off

To switch the Snake on, press and hold down the Installation button until the green light starts flashing.

To switch the Snake off, press and hold down Charging the battery button until the lights turn off.

6

Page 7
Image 7
Iqua Bluetooth Headrest Handsfree manual Getting Started, Installation, Charging the battery, Switching on and off