IRiver iMP-350 Specifications, Regulatory Information, Category, For the customers in Europe

SPECIFICATIONS

Category	Item		Specifications
	Frequency/Range	20Hz~20KHz
	Headphone output	12mW(L) +12mW(R) at 16			Max. Volume
Audio		8mW(L) + 8mW(R) at 32			Max. Volume
	Line output level	0.76V rms(47K		) Max. Volume
(CD)
	S/N ratio	90dB(CD-DA), 90dB(MP3 CD)
	Frequency Characteristics		2dB(Line Out)
	No of Channels	STEREO(L+R)
	FM Frequency range	87.5MHz~108MHz
	Headphone Output	12mW(L) +12mW(R) at 16			Max. Volume
Audio		8mW(L) + 8mW(R) at 32			Max. Volume
(FM TUNER)	Line output level	0.76V rms(47K		) Max. Volume
	S/N ratio	50dB
	Antenna	Headphone/Earphone-Cord Antenna
		CD-DA, CD-Text(8cm / 12cm)
	CD Type	CD-ROM Mode 1, Mode 2 Form1
CD Support		Enhanced CD, Mixed CD
	CD-R/RW Readability	Packet Write, ISO9660, Joliet, Romeo, Multi-
		Session
	File TYPE	MPEG 1/2/2.5 Layer 3, WMA ,ASF
File Support	Bit Rate	8Kbps ~ 320 Kbps
	Tag	ID3 VI , ID3 V2 2.0, ID3 V2 3.0
	AC Adapter	DC 4.5V , 1.2A
	Rechargeable Battery	Stick type Ni-MH battery 2 EA
Power Supply	External Battery Pack	Two 1.5V AA Size batteries
	Dimension	Approx. 130.5(W) x 140(D) x 13.7(H)mm
General	Weight	Approx. 145g (without Battery)
	Operational Temperature	0	~ 40

REGULATORY INFORMATION

Federal Communications Commission(FCC)

The device manufactured and found to comply with limits for a Class B computing device according to the specifications in FCC rules Part 15. Operation is subject to the following two conditions;

1.This device may not cause harmful interference, and

2.This device must accept any interference received, including interference that may cause undesired operation.

3.If your device needs repairs, you must arrange for the manufacturer to make them if you are to keep the device's FCC registration valid.

This equipment, like other electronic equipment, generates and uses radio frequency energy. If not installed and used according to the instructions in this manual, this equipment may cause interference with your radio and television reception.

If you think this equipment is causing interference with your radio or television reception, try turning the equipment off and on. If the interference problems stop when the equipment is switched off, then the equipment is probably causing the interference. You may be able to correct the problem by doing one or more of the following:

-Adjust the position of the radio or TV antenna

-Move away the device from the radio or TV

If necessary, consult your dealer or an experienced radio or television technician. You may find this booklet helpful:"How to Identify and Resolve Radio and TV Interference Problems"(Stock No. 004-000-00345-4), prepared by the FCC and available from the U.S Government Printing Office, Washington, DC 20402. See individual devices FCC

ID and registration numbers.

For the customers in Europe

The CE mark on the CD player is valid only for products marketed in the European Union.

- 44 - - 45 -