IRiver iMP-700 user manual On Handling Disc, On Safety

Should any problem continue after you have checked these symptoms, please contact iRiver sales representatives.

	Be sure your adapter is designed to work in the
AC adapter does not	country where it's being used.
	Check whether the plug is connected to the
work.
	proper jack on the player.
Remote control does	Check whether the HOLD switch is ON.
	(Switch to OFF position.)
not work.
	Connect the earphones/remote plug firmly.
Battery Life is short	Ensure the rechargeable batteries are fully
	charged.
	Avoid the excessive operation of remote control.
Characters in LCD are	Check out Menu	General	Language and
	confirm whether the right language has been
corrupted.
	selected. (Refer to page 21.)
	Adjust the position of the player and remote
Poor FM Reception	control.
	Electronic equipment can case interference with
(FM Tuner is included
	the FM reception. Turn		off any nearby
on the iMP-700T only.)
	electronics or move the player away from the
	source.
	Check whether the adapter plug is properly
	connected.
Recharging does not	Check whether the batteries inserted are
	rechargeable.
work.	Fully charged batteries will not accept additional
	charging.
	Check whether the CHARGE FUNCTION in the
	menu is set to “CHARGE ON”

On Handling Disc

On handling Disc

Avoid touching the surface (bright side) where data is stored.

Disc Cleaning

Avoid cleaning the disc surface. If necessary, clean the disc surface with a soft cloth following the directions described.

Do not stick papers or tape labels onto the surface (bright side).

Avoid using chemicals to clean the surface.

On Safety

Should any solid objects or liquid fall into the player, unplug it and have it checked by qualified personnel before operating it any further.

Do not put objects in the DC IN 4.5V jack (External Power output).

Use only the adapter provided with the player.

44 45