3Clean Roomba’s brushes
A. Remove brush guard by lifting both yellow tabs.
B. Remove and clean Roomba’s brushes.
Brush
Bearings
Brush Caps 
Tip: When replacing brush caps, make sure the alignment feature is properly rotated so it snaps into place.
C. Remove and clean hair and dirt from Roomba’s yellow brush bearings.
D. Remove and clean Roomba’s brush caps.
Alignment Feature
E. Use the included cleaning tool to easily remove hair from Roomba’s brushes.
Visit www.irobot.com/support for information on keeping Roomba running
at peak performance.
Excessive build up of hair in Roomba’s brushes and bearings can permanently damage Roomba. Inspect brush bearings regularly.
Do not attempt to run Roomba without the bearings. If you misplace Roomba’s brush bearings, contact iRobot Customer Care for replacement bearings.
For more detailed information, visit: www.irobot.com | 13 |
