Check Tank Troubleshooting
Normally, Scooba’s “Check Tank” light illuminates when Scooba’s Clean tank is empty or the Dirty tank is full. If the Check Tank is lit and this is not the case, follow these steps to troubleshoot the issue.
1Inspect and clean Scooba’s solution valve with a damp cloth.
Solution
Valve
Eject
Brush
2Confirm that the battery, filter, and vacuum port are properly installed, and that the tank is completely closed.
Filter
Battery
Vacuum
Port
3Fill Scooba’s Clean tank with approximately 1 cup of cold water, shake vigorously, and empty it to remove any debris in the tank. Refill Scooba’s Clean tank with water and Scooba cleaning solution or vinegar.
If the battery’s tabs are not inside the guide holes in the battery pocket, the tank and robot base may not be properly connected.
www.irobot.com 23
