Ironman Fitness Alpine specs

Assembly

Figure 5

Step 1:

Locate the right small handlebar (H2). Connect the pulse wire coming from the handlebar to the pulse wire coming from the console tube (B). Secure the handlebar to the console tube (B) using three bolts (G2).

Repeat for the left side.

Figure 5

Use tool

Figure 6

Step 1:

Attach the slide cover (G8) to the unit as shown in the image.

Step 2:

Slide the cover (G7) onto the handlebar assembly and secure using two bolts (G2).

Figure 6

Page 8

Image 8

Ironman Fitness Alpine owner manual Attach the slide cover G8 to the unit as shown in the image

Contents

Alpine Stepper Table of Contents Important Safety Information Safety Precautions and Tips Pulse Grip Instructions for Assembly Parts Identifier Assembly Step Tighten hardware using appropriate tools Attach the slide cover G8 to the unit as shown in the image Congratulations Console Instructions Console Buttons Console Functions General Information Getting StartedProgram Instructions Manual Program Watt Program ProgramsUser Program Heart Rate Program HRC Changing Between Metric Kilometers Standard Miles See Monitoring Your Heart Rate section for more information Monitoring Your Heart Rate Monitoring Your Heart Rate Warm Up Exercises Exercise Guidelines Wrist Extensor Calf Stretch Moving Instructions Parts List Alpine Part List REV.B Exploded View Warranty Information Residential and Personal Use Limited Warranty