Assembly
Figure 4
Locate bag labeled Figure 4. Lift and place left Linkage onto Sleeve and align holes. Secure Linkage to unit using four M8*12 mm Hex Bolts. Repeat for right side.
Note: The Linkage is secured to the sleeve with three M8*12 Hex Bolts on the top of the Linkage and one M8*12 Hex Bolt on the bottom of the Linkage.
Figure 5
Locate bag labeled Figure 5. Locate Right Pedal Tube Assembly. Secure Pedal Tube assembly to the Handrail Assembly with one M10*81.5 Hex Bolt and one M10*1.5 Hex Nut. Please ensure that Pedal arm is aligned in the center of roller wheel while tightening M10*81.5 (Figure 5a). Repeat for the left side.
Note: It is recommended that 2 adults align and secure the Pedal Tube Assemblies to the Handrail Assemblies.
Figure 5a |
Figure 4 |
SLEEVE |
LINKAGE |
M8*12 HEX BOLT |
Figure 5 | HANDRAIL ASSEMBLY |
| |
PEDAL TUBE ASSEMBLY |
|
| M10*1.5 HEX NUT |
M10*81.5 HEX BOLT |
|
