8. Sirius Satellite Radio Operation
Entering Mode Select Menu
Press the “BAND” button a few times until XM is displayed on the screen. Immediately turn the rotary TUNE KNOB in the top right hand corner to scroll through available sources. Once “SIRIUS” is displayed, press the “FWD>>” button to select the displayed mode.
Channel Up
Turn the rotary TUNE KNOB clockwise to move up through the channels
Channel Down
Turn the rotary TUNE KNOB
Category Selection
Press the “CAT” button then press the button that corresponds with the Category you wish to select.
Store Presets
Press and hold the preset button on which you want to store the channel.
Please Note: If you are using the Media GateWay to add Sirius but still have factory XM installed, it is important to keep the presets in seperate banks.
Recall Presets
Press the preset button that corresponds with the channel you want to recall.
Changing Display:
Press the “i” button to display artist and track information
Steering Wheel Controls
Press the “▲” button to cycle up through the categories.
Press the “▼” button to cycle down through the categories.
Press the “►I” button to move up through the channels.
9. Selecting AUX Input
Entering Mode Select Menu
Press the “BAND” button a few times until “XM” is displayed on the screen. Immediately turn the rotary TUNE KNOB in the top right hand corner to scroll through available sources. Once “AUX 1” or “AUX 2” is displayed, press the “FWD>>” button to select the displayed mode.
10. Selecting Factory Installed Sat
(if equipped)
Entering Mode Select Menu
Press the “BAND” button a few times until “XM” is displayed on the screen. Immediately turn the rotary TUNE KNOB in the top right hand corner to scroll through available sources. Once “SAT” is displayed, press the “FWD>>” button to select the displayed mode.
8
