iSimple PGHGM1, PXAMG owner manual Installation

5. Installation

1.When making electrical connections it is always recommended that the vehicle’s battery be disconnected from the electrical system before performing the installation.

Please Note: If the radio is equipped with a built in CD Changer, please remove ALL discs before proceeding to prevent damage to the radio’s CD mechanism.

2.Carefully remove the trim panels covering the 7mm bolts that secure the radio into the dash cavity. Remove these bolts, and carefully pull the radio from the dash of the vehicle. This will provide access to the factory radio connectors where you will connect the Media GateWay harness.

3.Disconnect the factory 16-Pin harness and 14-Pin harness from the back of the radio. Disconnect the antenna from the radio.

4.Connect the 8-Pin iPod docking cable into the first port on the Media GateWay

(farthest away from dipswitches). Carefully run the 11 foot iPod cable behind the dash to the location where the iPod will be mounted or stored (for example the glove box or center console). This location will vary based on the vehicle, and the customer’s prefrence. When running this cable through the dash be sure to secure it away from moving parts or sharp metal edges that may damage the cable.

5.Connect the 8-Pin auxiliary input cable to the second port (closest to the dipswitches) on the Media GateWay if an additional auxiliary input is desired.

6.If connecting the HD Radio Tuner (HDRT sold separartely), make the folllowing connections before connecting the PXAMG to the vehichle. Plug the 3 foot HD Radio Cable (8-Pin mini-din to 8-Pin mini-din) cable into the second port (closest to the dipswitches) on the Media GateWay. Connect the other end of this cable into the HD Radio tuner. Connect the factory antenna cable into the antenna connection on the HD Radio tuner (HDRT).

7.If connecting the Satellite Radio tuner (SCC1 sold separartely), make the folllowing connections before connecting the PXAMG to the vehicle. Plug the black end

of the 3 foot ISSR11 (8-Pin mini-din to 8-Pin mini-din; sold seperately) into the second port (closest to the dipswitches) on the Media GateWay. If you are installing the Satellite Radio Tuner with the HDRT, connect the ISSR11 cable to the port farthest from the dipswitches. Connect the gray end of this cable into the Satellite Radio tuner.

8.If connecting the ISBT21 (sold separartely), make the folllowing connections before connecting the PXAMG to the vehichle. Plug the 3 foot

ISBT21 Cable (8-Pin mini-din to 8-Pin mini-din) cable into the first port (farthest from the dipswitches) on the Media GateWay. Connect the other end of this cable into the ISBT21. Connect the microphone cable into the 3.5 mm

connection on the ISBT21.

4