Introduction
Thank you for purchasing the iSimple® PXAUX. The PXAUX is designed to provide endless hours of listening pleasure from your factory radio. To ensure that your auxiliary audio input performs correctly with your radio, we recommend that you read this entire manual before attempting installation of the PXAUX. This interface allows connectivity for auxiliary audio input.
This manual is a supplemental guide to explain the operation of the PXAUX. For other information such as Precautions and Installation, please refer to the full PXAMG owner’s manual that is included with your vehicle specific harness.
Compatibility
Please visit www.isimplesolutions.com for the most
Ford/Lincoln/Mercury PGHFD1 Operation
Selecting AUX:
Press the “AUX” or “SAT” button (SR123 icon on navigation radio) until “AUX1” is displayed on the screen. When you press the “AUX” button, you will see the corresponding “SAT” modes, a slight delay, and then the current mode will be displayed.
Selecting between AUX1 / AUX2
Press the “AUX” or “SAT” button (SR123 icon on navigation radio) until “AUX1” or “AUX2” is displayed on the screen.
General Motors PGHGM1 Operation
Non Navigation
Selecting AUX
Press the “BAND” button a few times until “XM” is displayed on the screen. Immediately turn the rotary knob in the top right hand corner to scroll through available sources. Once “AUX1” is displayed, press the “FWD>>” button to
select it. If you are currently in “SAT” mode you will need to press the “►I
SEEK” button instead of “FWD>>” to select “AUX1” mode.
Selecting between AUX1 / AUX2
If you are currently in “AUX1” or “AUX2” mode turn the rotary knob to cycle through the available sources. Once “AUX1” or “AUX2” is displayed on the screen press the “FWD>>” button to select it.
Navigation radio operation
Selecting AUX
Press the “FM” button then press the “XM” button. Immediately turn the rotary tune knob in the top right hand corner to scroll through available sources.
4