ITT 29-100-1 ST Using the TV, Turning on for the first time and Tuning, TV controls, Volume, Mute

Using the TV

Turning on for the first time and Tuning

When you first turn your TV on, “ Language” menu willl appear. To search on the languages, use the Program up or Program down. Volume up or Volume down butttons and choose your desired language and press “OK” button.

Then “Country Selection” menu will appear. Choose your country using Program up or Program down. Volume up or Volume down and press “OK” button. “Autoprogram” process will begin and oll the channels will be searched and stored.

TV controls

Stand-By mode

When your TV is working on, press the red “STAND-BY” button on the right upper corner of your remote control to switch off and the Stand- By indicator (Led) will be brighter. To turn on your TV again, press one off the numaric buttons, Program up or Program down.

Please Note: If you will not use your TV for a long time, do not leave it on Stand-By mode, instead switch it off from the power button on the front panel of the TV set. If you always leave your TV on Stand-By mode, demognetization process will notoccur and that will couse coloring problems. If you occurs, press the power button to switch off your TV and weit until it cools off.

Programme selection
Press the Program up or Program
down buttons on the TV or remote
control or press a Numeric button
to select a programme.
To select a programme whose
number is greater than 9 using the
numeric buttons, press the -/--
button first and then press the two
Numeric buttons. For example, to
select programme 12, press the-/--	7
button followed by1 and then 2 .

You can also select a program by pressing in the Yellow button to see the Program Table.

PROGRAM TABLE

P00	----	P005	P010
P01	ITV	P006	P011
P02	TV4	P007	P012
P03 CNN		P008	P013
P04 BBC1		P009	P014

SKIP DELETE MOVE NAME

Use the Program up and Program down buttons to scroll through the programme numbers. When you find the program number you want press theOK button again.

Press theTV/TX button to close the

Program Table.

Volume

Press the Volume + or Volume - button on the TV or the Vol▲ or Vol ▲ button on the remote control. A sound level bar will appear on the screen.

Mute

To mute the sound press the Mute button on the remote control. A loudspeaker symbol will appear on the screen.