!NOTE
It is very important for installer to verify that center line of top pivot point lines up with center line of bottom pivot point before final installation. Heel edge of door must be beveled 1/8” in 2” as shown below.
*Depth of mortise will vary depending upon
installation and/or threshold height.
Edge of base plate is flush with edge of door
5/8” |
| |
16 mm* | to | 27 mm* |
3/4” | |
19 mm | 29 mm |
| |
| 27 mm |
| |
| 60 mm |
Right hand installation shown;
left hand opposite
| 26488 Rev. 3 |