Using the remote control
You can use the remote control in place of your computer’s mouse. This lets you control your computer and give
Quick Setup
EPSON® PowerLite® 8300i
Troubleshooting
If you see a blank screen...
If you see a blank screen or the No signal message after turning on your laptop, check the following:
Make sure the power light on the projector is green and not flashing, and the lens cover is off.
No signal ( ? Help)
2
3
If this is your first time using the remote, make sure its batteries are installed. Then turn on the power switch on the side of the remote.
Now you can use the remote control in place of your computer’s mouse:Move cursor
|
| Power |
Page |
| |
|
| R/C |
|
| ON |
r | A/V Mute | OFF |
Mode |
| Resize |
Colo |
|
|
|
| Freeze |
Press the Computer/DVI button on the projector to select Computer 1 as the image source.
If you’re using a Windows laptop, press the function key on your keyboard that lets you display on an external monitor. It may be
labelled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it. Allow a few seconds for the projector to sync up after changing the setting.
If the projector and laptop
don’t display the same image...
If your image displays either on the projector or laptop, but not on both, check the following:
WindowsTry using the CRT/LCD or function key as described above. On most systems, this key lets you toggle between the LCD screen and the projector, or display on both at the same time.
Menu | Help |
You can also use the Page up |
| and down | Preview | Preset | Auto | |
buttons to change slides in PowerPoint. | Focus | Zoom | LensShift | |||
|
|
| Power |
| Volume |
|
|
|
|
|
|
| |
| Page |
| Num |
|
| |
|
|
|
|
|
| |
|
|
| R/C |
|
|
|
Change slides in |
|
| ON |
|
|
|
| A/V Mute | OFF |
|
|
| |
| Color | Resize |
|
|
| |
|
|
|
|
| ||
PowerPoint | Mode |
|
|
|
| |
|
|
|
|
| ||
|
| Freeze |
|
|
|
Where to get help
Telephone Support ServicesTo use the EPSON PrivateLine® Support service, call (800)
Monday through Friday
Toll or long distance charges may apply.Electronic Support ServicesEPSON provides technical assistance through electronic support services 24 hours a day at http://support.epson.com. For tips, templates, and training for developing successful presentations go to http://www.presentersonline.com.
If that doesn’t work, check your monitor settings to make sure both the LCD screen and the external monitor port are enabled. From the Windows Control Panel, open the Display utility. In the Display Properties dialog box, click the Settings tab, then click Advanced. The method for adjusting the setting varies; you may have to click a Monitor tab, then make sure the external Monitor port is set as your primary display and/or enabled.
See your laptop’s manual or online help for details.Macintosh OS X1. From the Apple menu, select System Preferences, then select Displays.2. Select the Color LCD dialog box.Click here
3.Click the Arrange (or Arrangement) tab and click Mirror Displays.Macintosh OS 9.x or earlier1.From the Apple menu, select ControlPanels, then click Monitors orMonitors and Sound.2. Click the Arrange icon.3.Drag one monitor icon on top of the other.If the Arrange option isn’t available, click the Monitor icon and select a Simulscan resolution.
EPSON is a registered trademark of SEIKO EPSON CORPORATION. PowerLite and PrivateLine are registered trademarks of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks. Copyright © 2003 by Epson America, Inc.
Printed in XXX. 3/03