Jabra 2400 How to connect headset to PC, How to Wear the Duo and mono Headset, 2 cm 3/4

How to connect headset to PC

Plug the headset directly into a free USB port on your PC. Once connected, the headset's mute and hookswitch buttons will be illuminated.

The first time connected, your PC displays a small pop-up message in the task bar to indicate that a new device has been found. You are now ready to use the headset.

How to Wear the Duo and mono Headset

Adjust the headband length.

The headband is adjustable in length to fit the size of your head. Push or pull the top section of the headband until the headset fits comfortably.

Wear the headset.

Duo: Position one speaker over each ear with the band going over the top of your head, just as with a traditional pair of headphones.

Mono: Place the headband over your head, with the headset positioned against your preferred ear and the T-bar positioned just above the opposite ear. Adjust the headband for optimal fit on your head.

Position the microphone.

Adjust the microphone by rotating it around the headset and flexing the boom arm until it is positioned less than 2 cm (3/4") from your mouth.

.

2 cm 3/4"

4