Jabra 250 Choosing wearing preference, Making a call, Ending a call, Answering a call, English

English

6 Choosing wearing preference

FreeSpeak 250 is ready to wear on the right ear. If you prefer the left, gently rotate the MiniGel 180°.

For optimal performance, wear FreeSpeak 250 and your Bluetooth phone on the same side of your body. In general, you will get better performance when there are no obstructions (including parts of your body) between the headset and the phone.

Fig. 4

7 Making a call

If JABRA FreeSpeak 250 is off, turn it on now (see Turning headset on/off section).

Using phone’s keypad

1.Dial number on keypad.

2.Press phone’s “send” key.

Using voice-activated dialing (after you’ve set up voice tags on your phone)

1.Press and releaseonce. You’ll hear 1 short beep while doing this.

2.You’ll then hear the voice-activation tone; say the name of the person you wish to call.

NOTE: Record voice tag from headset for better reception.

8 Ending a call

•Press and releaseonce.

OR

•End call from phone’s keypad.

9 Answering a call

•After you hear the ring tone, press and releaseonce.

OR

•Answer the call with your phone’s keypad. You may then need to transfer the call to the headset by pressing and releasingonce (depending on your phone).

10Call-waiting*

•(Recommended) Use standard method from your phone’s keypad which typically involves pressing the “send” button

OR

•Press and releaseonce to answer the incoming call and toggle between calls (some phones do not support this headset feature).

IMPORTANT: Do not hold thebutton down too long when making, ending, or answering a call. This should only be a quick tap, so you don’t put the headset into pairing mode by accident.

*See Enhanced features section for alternative call-waiting instructions for phones that support the hands-free profile.

TIPS AND SOLUTIONS

11 Resetting the headset

If the headset is not responding or the blue light will not turn on or off after pairing, you may need to RESET your headset.

1.Fully insert the headset into the charging cradle.

2.Plug the JABRA FreeSpeak 250 AC adapter into the headset’s charging cradle.

3.Plug the AC adapter into the electrical outlet.

English

8 9