US
supplied USB cable to the port marked 
on the Jabra PRO base.
2.Connect the other end of the USB cable to any free USB port on your computer.
Step 7: Enable your softphone interface
1.Insert the
The softphone part of the setup wizard will prompt you to do this.
The installation includes the supported softphone drivers necessary to enable the softphone interface.
If you have any questions as you work through the setup wizard, or if you would like to learn more on how to use the many advanced features of your headset solution, please refer to the full user manual. This is included on the
2.
The Jabra Device Service window opens. This shows the list of softphone drivers installed on your PC. Use the online help available in this window to learn more.
3.Select the softphone you want to use (target softphone) from those available in the Select softphone for outgoing calls
4.Run the Jabra Control Center — click on the Windows Start button and select All Programs > Jabra > Jabra PC Suite > Jabra Control Center.
5.Select the Softphone tab for your Jabra PRO device.
6.In Target softphone for outgoing calls, select either Microsoft Office Communicator or Softphones supported by Jabra PC Suite. Configure other parameters, as required.
This establishes the default softphone target type. Use the online help available in this window to learn more.
Step 8: Connect to your mobile phone
The setup wizard asks whether you want to connect to a mobile phone and guides you through the procedure:
1.You must ensure that Bluetooth is active on your phone and then put it in pairing mode.
Your phone looks to see if any nearby Bluetooth devices are advertising themselves for pairing.
2.Use your phone’s controls to identify and select the “Jabra PRO 9470” device. Your phone might also ask for the headset’s pass code. The pass code for all Jabra devices is 0000 (four zeros).
Your phone tries to pair with and connect to the base.
