2 cm 3/4"
4 | 5 | 6 |
4.How to wear the neckband.
Wear the neckband so the band goes around the back of your neck and the bowed sections go over your right and left ear respectively, whilst the ear cushion sits on your ear.
5.Position the microphone.
Adjust the microphone by rotating it around the headset and flexing the boom arm until it is positioned less than 2 cm from the front of your mouth.
6.How to rotate the boom arm. The boom is free to rotate 360o.
Wearing a Duo Headset
(Duo models only)
The duo version of Jabra BIZ 2400 is always worn as a headband. To wear and adjust your headset:
1 | 2 |
1.Adjust the headband length.
The headband is adjustable in length to fit the size of your head. Push or pull the top section of the headband until the headset fits comfortably.
2.How to wear the headset.
Position one speaker over each ear with the headband going over the top of your head, just as with a traditional pair of headphones. The headset can be worn on either the left or right ear, simply rotate the boom arm as needed.
8
2 cm |
|
|
3/4" | 3 | 4 |
|
3.How to position the microphone.
Adjust the microphone by rotating it around the headset and flexing the boom arm until it is positioned less than 2 cm from the front of your mouth.
4.How to rotate the boom arm. The boom is free to rotate 360o.
Connecting the Headset to a Phone or Computer
The headset features a Quick Disconnect (QD) connector, which enables you to use the headset with a variety of telephones, computers and other sound sources by attaching any of the QD cords and adapters available from GN Netcom A/S.
To connect your headset to a QD adapter, simply press its connector into the similar connector on your adapter. Then connect the adapter to a telephone or computer and your headset is ready to use.
You can disconnect your headset at any time without terminating the current call (if any). To do so, hold the QD adapter with your thumb and index finger and pull the connectors apart. Always pull on the connectors, never on the cords.
For more information about QD adapters, please see the documentation that came with your adapter and/or go to www.jabra.com.
Care, Cleaning and Maintenance
-Avoid getting the headset wet and never submerge it in water.
-Avoid stretching, bending or twirling the wire; this will weaken the connectors and the wire itself and may result in loss of audio.
-Do not block the microphone holes on either side of the boom arm. Advanced Jabra BIZ 2400 models feature a small hole on both the inward and outward facing sides of the boom. This
-You can clean the ear cushions or other parts of the headset by using a cleaning wipe designed for use with electronic and plastic equipment. Allow to dry before replacing them. Suitable tissues are available from GN Netcom A/S; contact your GN Netcom A/S representative for details. After extensive use, the ear cushion may become worn. New ear cushions are available from GN Netcom A/S.
Dispose of the product according to local standards and regulations. | 9 |
www.jabra.com/weee |
