”Disconnected” | Announced if a connected phone/ |
| device is turned off, goes out of |
| range or has BT disabled while in |
| range and while the speakerphone |
| is still turned on.. |
|
|
”Battery level is low” | Announced when the battery level |
| goes below 10% |
|
|
”Voice on/off” | Announced when voice guidance |
| and controls are enabled or disabled |
|
|
”Call from <name from | Announced when there is an |
phone address book or | incoming call if your phone/device |
number>”* | supports caller ID (PBAP) |
|
|
ADDITIONAL FEATURES
Play music, podcasts and GPS Announcement*
If your phone or device supports A2DP audio streaming you can hear your music or any other audio through your Jabra SUPREME.. Simply start playing your music or start your application and the audio will automatically transfer to SUPREME.. If your phone rings the audio will mute and you can answer or ignore the call.. The audio will resume after the call..*
Using you Jabra SUPREME with two mobile devices at the same time
The Jabra SUPREME supports Advanced MultiUse™ and is capable of having two mobile phones (or other Bluetooth® devices) connected at the same time.. This will give you the freedom of having only one headset to operate both of you mobile phones/ devices..
When you have two active phones/devices connected you will hear ”Two devices connected”.. In this state the phone paired last will be used for voice dialing.. When two phones are connected you can place and answer calls on both and switch between the two.. If you are on a call and receive a second call you will be alerted by a tone.. You can then:
-Put the first call on hold and accept the incoming call by pressing the Answer/end button
-Switch between the two active calls by pressing the Answer/ end button again
JABRA SUPREME | 12 |
* Phone dependent
