-Tap the Answer/end button once to end the first call and accept the new incoming call
QUICK REFERENCE TABLE FOR MANUALLY CONTROLLING YOUR JABRA SUPREME
Function | Action |
|
|
Entering pairing | Flipping boom arm to On position |
mode |
|
|
|
Cancel pairing mode | Tap the Answer/end button |
|
|
Answer call | Tap the Answer/end button |
|
|
End a call | Tap the Answer/end button |
|
|
Reject a call | Double tap the Answer/end button to |
| reject an incoming call |
|
|
Initiate phone voice | Press the Answer/end button when |
dial* | connected or not on an active call or |
| tap the Voice button and say “Phone |
| commands” to activate the voice |
| dialing feature on your phone..* |
|
|
Enable or disable | Press and hold the Voice button while |
Voice Guidance and | flipping the boom arm toOn position.. |
commands | You will hear ”Voice on” when |
| you enable and ”Voice off” when you |
| disable the voice features.. |
|
|
DISABLE | When in a call you can press the Voice |
ACTIVE NOISE | Control button to disable Active Noise |
CANCELLATION | Cancellation feature.. Press again to |
| enable.. |
|
|
Reset to factory | Turn on the SUPREME and press |
default | and hold the Answer/end, VOL+ |
| button together for about 6 seconds.. |
| When the SUPREME is reset it will |
| automatically go into pairing mode.. |
|
|
Download Firmware updates and additional languages
Go to jabra..com/SUPREME and download the latest firmware and additional languages..
JABRA SUPREME | 13 |
* Phone dependent |
|
