2Turn on your headset
•Press and hold the answer/end button to turn on your headset.
•Press and hold the answer/end button to turn off your headset.
3Pair it with your phone
Before you use your Jabra BT150, you need to pair it with your mobile phone.
1.Put the headset in pairing2 mode Make sure that the headset is on.
Press the answer/end button and press the volume up (+) button at the same time, until a solid blue light comes on.
2.Set your Bluetooth phone to ‘discover’ the Jabra BT150
Follow your phone’s instruction guide. This usually involves going to a ‘setup,’‘connect’ or ‘Bluetooth’ menu on your phone and selecting the option to ‘discover’ or ‘add’ a Bluetooth device.* (See example from a typical mobile phone in fig. 4)
3.Your phone will find the Jabra BT150
Your phone then asks if you want to pair with it. Accept by pressing ‘Yes’ or ‘OK’ on the phone and confirm with the passkey or PIN3 = 0000
(4 zeros).
Your phone will confirm when pairing is complete. In case of unsuccessful pairing, repeat steps 1 to 3.
4Wear it how you like it
The Jabra BT150 is ready to wear on your right ear. If you prefer the left, gently flip and rotate the earhook 180°. (See fig. 2)
For optimal performance, wear the Jabra BT150 and your mobile phone on the same side of your body or within line of sight. In general, you will get better performance when there are no obstructions between your headset and your mobile phone. (See fig. 5)
5How to...
Answer a call
•Tap the answer/end button on your headset to answer a call
End a call
•Tap the answer/end button to end an active call
Reject a call (Dependent on your phone supporting this feature)
•Press the answer/end button when the phone rings to reject an incoming call. Depending on your phone settings, the person who called you will either be forwarded to your voice mail or hear a busy signal
Make a call
•When you make a call from your mobile phone, the call will (subject to phone settings) automatically transfer to your headset
Activate voice dialing (Dependent on your phone supporting this feature)
•Tap the answer/end button. For best results, record the
Redial last number (Dependent on your phone supporting this feature)
•Press the answer/end button
Adjust sound and volume
•Press the volume up or down (+ or
6What the lights mean
What you see | What this means about your headset |
|
|
Flashing blue light | Flashing every second: active on a call |
Flashing blue light | Flashing every three seconds: in standby mode4 |
Flashing red light | Running low on battery |
Solid blue light | Charging |
Solid blue light off | Fully charged |
Solid blue light | In pairing mode – (See section 3) |
|
|
4 | 5 |
