Put the headset in pairing mode manually
In case of unsuccessful pairing, put the Jabra BT2046 into pairing mode manually.. Make sure the headset is off.. Press and hold the answer/end button for approximately 5 seconds until the LED has a constant light.. The LED will flash before the light is constant – keep holding down the button until light is constant.. Then follow the steps 2 and 3 above..
WEAR IT HOW YOU LIKE IT
The Jabra BT2046 is designed to wear with an earhook but it can also be worn without the earhook by simply inserting it in your right or left ear.. If you prefer to use the earhook, click it on as shown on the illustration..
For optimal performance, wear the Jabra BT2046 and your mobile phone on the same side of your body or within line of sight..
In general, you will get better performance when there are no obstructions between your headset and your mobile phone..
HOW TO
Answer a call
-Tap the answer/end button on your headset to answer a call..
End a call
-Tap the answer/end button to end an active call..
JABRA BT2046 | 6 |
