Note: It is possible to turn off the voice announcement function.. When tapping the Volume Up or Volume Down buttons to select the desired language, the beep tone indicates the voice announcement function is off.. When beep tone is heard press FM button and the voice announcement function will be off..
USING THE FM TRANSMITTER
The FM transmitter in the speakerphone allows you to transmit calls and music from your mobile to the car stereo when the speakerphone and car radio are set to the same frequency..
-Connect your mobile phone and speakerphone..
-Press FM button to enter FM mode.. The FM Status Icon will turn solid red and a FM frequency will be announced..
-Manually turn your radio into the same FM frequency and you are now ready to transmit calls or music from your phone to your car stereo..
-The FM transmitter will automatically turn off after 10 minutes if the function is not used..
Note: The visor clip works as the FM antenna.. The FM transmitter will not work if the visor clip is removed..
CHANGING FM FREQUENCY
When you enter FM mode the speakerphone will always transmit calls and music on the latest used FM frequency.. For the FM transmitter to work well, a free radio frequency must be found..
A free radio frequency is one that no commercial and public radio station is broadcasting on.. As you drive and change environment the FM audio quality could potentially be reduced due to frequency interferences.. If sound performance is unsatisfactory it is possible to select a new FM frequency..
-Enter FM mode..
-Press Volume up button until “Searching” is announced..
-When a new frequency is found and announced, tune your radio manually into the same FM frequency.. The speakerphone will automatically save the new frequency..
A tap on the Volume up/Volume down button will change the frequency on your speakerphone by 0..2 MHz allowing you to fine tune the signal..
english
Jabra CRUISER2 | 11 |
