Jabra KYO300 Power On, Power Off, Answer a Call, Adjust Earphone Volume, Reject An Incoming Call

PERFORMING BASIC FUNCTIONS

Power On

Press the Multi Function button for approximately 3-5 seconds. The LED Indicator will flash blue 4 times and then turn on.

Power Off

Press the Multi Function button for approximately 3-5 seconds. The LED Indicator will flash red several times and then turn off.

Answer a Call

Press the Multi Function button.

Adjust Earphone Volume

Press the Volume Increase + button or Volume Decrease - button.

Reject An Incoming Call

Press the Multi Function button for 5 seconds.

End A Call

Press the Multi Function button.

Transfer A Call

Press the Volume Decrease - button for 5 seconds.

Last Number Re-dial

(phone dependant feature)

Press the Volume Increase + button for 5 seconds.

IMPORTANT INFORMATION

Maintenance

•Disconnect the charger and power off the headset when you clean it. Do NOT directly spray liquid or cleansers on the surface of your headset. Spray the cleanser on a soft cloth and then clean the device with it.

•Do not store in a dusty place or in very high temperatures nor low temperatures.

•Do not disassemble this product, as this may damage it.

•Avoid rough treatment such as dropping, knocking, or shaking this product.

Bluetooth HeadsetKYO300 4