I n v e r t i n g t h e I m a g e
NOTE: You can remove the air filter door from the projector while it is still hanging on the ceiling by carefully reaching between the projector and base plate and using a coin to loosen the door.
When you need to remove the projector or clean the air filter:
1Hold the projector from underneath.
2Remove the knurled knob that holds the pro- jector to the mounting plate.
3Slide the projector to release it from the quick release bolts. The projector will come off of the mounting plate. The mounting plate will still be attached to the base box.
4Clean the air filter as described in your LP 1000 User’s Guide if needed.
5Realign the quick release bolts in the keyhole slots on the mounting plate.
6Fasten the knurled knob.
ADJUSTING THE IMAGE
Inverting the Image
1Press the menu button on the remote or key- pad to display the projector’s
2Using the disk mouse on the remote or the navigation buttons on the keypad, move the cursor to the Controls tab to display the Con- trols menu.
3Move the cursor to the Ceiling Mount box.
4Click either of the two mouse buttons to invert the image.
Replacing the Lamp Module
You don’t need to remove the projector from the ceiling to replace the lamp. Refer to the LP 1000 User’s Guide for lamp removal instructions.
10
