SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS

CHANGING THE AJ-44CE/CS DIRECTION OF TRAVEL

The AJ-44 dishmachine has the ability to have its direction of travel changed from left to right, or from right to left. Direction of travel is determined by which end the rack of ware is put into the machine and which end the rack comes out.

There may come times when it is necessary to change the direction of travel after the unit is installed. The instructions provided here are for maintenance personnel only. Unauthorized persons should not attempt any of the steps contained in these instructions.

Warning: many of the instructions and steps within this document require the use of tools and may also require that personnel change the wiring of the machine. Only authorized personnel should ever perform any maintenance evolution on the dishmachine!

PREPARATION

1.Power must be secured to the unit at the service breaker. Tag or lock out the service breaker to prevent acci- dental or unauthorized energizing of the machine.

2.Disconnect incoming water at the water pressure regulator or Y-strainer.

3.Disconnect the service drain line from the drain plumbing of the dishmachine itself. Ensure that the unit is completely drained before doing this.

4.Remove the locking screw from the control box.

5.Remove the front dress panel.

TOOLS REQUIRED

The following tools will be needed to perform this maintenance evolution:

1.5/16” nutdriver

2.7/16” nutdriver

3.7/16” combination wrench

4.7/16” socket with drive ratchet and 4” extension

5.12” pipe wrench

6.10” adjustable wrench

7.Wire cutters

8.Phillipshead screwdriver

TIME REQUIRED

It is estimated that it will take (1) person three hours to perform this task, not including all of the items indicated in the section entitled “PREPARATION”.

IMPORTANT NOTES

1.Do not lose hardware! Place hardware in a safe spot away from the machine, ensuring that it does not fall loose into the machine tub. Hardware that is drawing into the suction of the wash pump will damage the equipment. If you do need more hardware, contact your JACKSON representa- tive to purchase new items.

2.Read these instructions thoroughly before attempt- ing this maintenance evolution. Become familiar with the parts and what actions need to be taken. This will save time in the long run!

STEPS

1.Remove the upper wash arm assembly by loosening the spin nut. The spin nut has a stop so it will not come off. Once it is loosened, the wash arm assembly should slide off.

Spin nut

2.Remove the end cap from the wash arm assembly and place in the opposite end, securing it snugly.

End cap

3.With the end cap securely in the opposite end of the wash arm assembly, set the assembly gently to the side. Go back inside the unit to where the upper wash arm assembly secured in the unit and turn the spin nut so that it is all the way down. This needs to be done because in a further step, if the spin nut is out, it will get in the way. Do not over-tighten the spin nut as it only needs to be out of the way, not secured.

AJ-44C Series Technical Manual 7610-001-76-22

Issued: 03-21-2006 Revised: N/A

34

Page 41 Page 43
Page 42
Image 42
Jackson AJ-80CEL, AJ-66CSL, AJ-66CGP, AJ-44CSL, AJ-80CS, AJ-66CEL Preparation, Changing the AJ-44CE/CS Direction of Travel
Page 41 Page 43

AJ-66CE, AJ-80CSL, AJ-44CS, AJ-66CGP, AJ-66CS specifications

The Jackson AJ series of guitars, including the AJ-44CEL, AJ-66CEL, AJ-44CSL, AJ-80CEL, and AJ-80CS, showcases a remarkable blend of craftsmanship and innovation. Built for guitarists who demand both performance and aesthetic appeal, these models feature a range of characteristics that make them standout instruments.

The AJ-44CEL is designed with a solid spruce top that enhances tonal clarity and projection. Its mahogany back and sides contribute warmth and resonance, making it suitable for a variety of playing styles. With a classic dreadnought body shape, it offers a balanced response across the frequency spectrum, ideal for both strumming and fingerpicking techniques. The Fishman Presys electronics system ensures that the natural tone of the instrument is preserved when amplified, providing versatility for live performances.

Similarly, the AJ-66CEL elevates the playing experience with its premium materials. A solid Sitka spruce top is paired with Indian rosewood back and sides, delivering a rich, full-bodied sound. The enhanced bracing pattern supports dynamic playing while reducing feedback during amplification. The cutaway design allows for easy access to the higher frets, making it a favorite among soloists.

The AJ-44CSL model takes a slightly different approach, featuring a shallow body depth. This design choice offers comfort during extended playing sessions while maintaining a surprisingly robust sound. Its body is constructed with a solid cedar top, offering a warmer tone with a quicker response time. The combination of the cedar top and mahogany back makes it perfect for fingerstyle guitarists who appreciate nuance and expressiveness in their music.

The AJ-80CEL and AJ-80CS models raise the bar with their detailed craftsmanship. The AJ-80CEL boasts a solid Sitka spruce top and a beautiful rosewood back and sides combination. Its ornate inlays and binding enhance the visual appeal, making it a visually striking option for stage performances. The AJ-80CS, on the other hand, features a solid cedar top and similarly stunning aesthetics, favored by players who crave a vintage look and feel.

All the guitars in the AJ series come equipped with quality hardware including comfortable neck profiles and premium tuners, ensuring that every musician can find their perfect fit. These models are constructed with an emphasis on durability and tonal integrity, providing players with an instrument that is not only appealing but also reliable for years to come. With their unique blend of aesthetics, functionality, and advanced technology, the Jackson AJ series is a testament to modern guitar making, designed for the discerning guitarist.
Top Page Image Contents