Jackson Dishmachine Component manual After Maintenance Actions, Special Notes, Special Parts

www.jacksonmsc.com

22.With the mesh screen removed, look down into the valve and verify it is not clogged. Remove any foreign objects from the valve body that would obstruct flow.

23.Reassemble the valve, reversing the steps needed to take it apart. Replace defective replacement parts with new parts from ordered kits. Ensure that components are sufficiently tightened to prevent leakage.

AFTER MAINTENANCE ACTIONS

Reconnect the incoming water (if disconnected) and turn on. Then restore power to the unit. Run the unit for at least 10 min- utes to ensure there are no leaks. If any problems arise you can contact Jackson Technical Service.

Removing the screen retainer

SPECIAL NOTES

20.Using the small flathead screwdriver, lift out the screen retain- er. Verify that the holes in it are free of clogs and debris.

Work performed on Jackson dishmachines by unautho- rized or unqualified personnel may void the warranty. Before begin- ning this or any other maintenance evolution on a unit under war- ranty, you should contact a certified Jackson technician or Jackson Technical Service. You can find a list of qualified service agencies in the back of you unit’s installation manual.

Removing the mesh strainer screen

21.Again using the small flathead screwdriver, carfully remove the mesh screen from inside the valve body. The screen should be taken and rinsed out to remove any debris fouling it.

SPECIAL PARTS

Solenoid Valve Plunger Kit Includes plunger and spring Part number 04810-200-09-18

Solenoid Valve Diaphragm Kit Includes diaphragm and o-ring

Part number 04810-200-03-18 (1/2” NPT) Part number 04810-100-10-18 (3/4” NPT)

Solenoid Valve 110 Volt Coil and Housing Part number 04810-200-01-18

Solenoid Valve 230 Volt Coil and Housing Part number 04810-200-02-18

Complete Solenoid Valve

Part number 04810-100-12-18 (1/2”, 110 Volt) Part number 04810-100-09-18 (1/2”, 230 Volt) Part number 04810-100-53-00 (3/4”, 110 Volt) Part number 04810-100-03-18 (3/4”, 230 Volt)

CONTACT INFORMATION

Jackson MSC Inc. provides technical support for all of the dishmachines detailed in this manual. We strongly recommend that you refer to this manual before making a call to our technical sup- port staff. Please have this manual with you when you call so that our staff can refer you, if necessary, to the proper page. Technical support is available from 8:00 a.m. to 5:00 p.m. (EST), Monday through Friday. Technical support is not available on holidays. Contact technical support toll free at 1-888-800-5672. Please remember that technical support is available for service personnel only.

View inside the solenoid valve body

Parker Style Solenoid Valve Repair Kit Instructions	5
Revision A (04/15/2005)