Drain Hose

Incoming Plumbing Y-Strainer

Back of Machine Showing Drain Hose

SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

VISUAL INSPECTION: Before installing the unit, check the container and machine for damage. A damaged container is an indi- cator that there may be some damage to the machine. If there is damage to both the container and machine, do not throw away the container. The dishmachine has been inspected and packed at the factory and is expected to arrive to you in new, undam- aged condition. However, rough handling by carriers or others may result in there being damage to the unit while in transit. If such a situation occurs, do not return the unit to Jackson; instead, contact the carrier and ask them to send a representative to the site to inspect the damage to the unit and to complete an inspection report. You must contact the carrier within 48 hours of receiving the machine. Also, contact the dealer through which you purchased the unit.

UNPACKING THE DISHMACHINE: Once the machine has been removed from the container, ensure that there are no miss- ing parts from the machine. This may not be obvious at first. If it is discovered that an item is missing, contact Jackson imme- diately to have the missing item shipped to you.

LEVEL THE DISHMACHINE: The dishmachine is designed to operate while being level. This is important to prevent any damage to the machine during operation and to ensure the best results when washing ware. The unit comes with adjustable bullet feet, which can be turned using a pair of channel locks or by hand if the unit can be raised safely. Ensure that the unit is level from side to side and from front to back before making any connections.

	PLUMBING THE DISHMACHINE: All plumbing connections must comply with all applicable	Adjustable Bullet Foot

	local, state, and national plumbing codes. The plumber is responsible for ensuring that the	Drain Hose
	incoming water line is thoroughly flushed prior to connecting it to any component of the dish-	Drain Hose

	machine. It is necessary to remove all foreign debris from the water line that may potential-
	ly get trapped in the valves or cause an obstruction. Any valves that are fouled as a result
	of foreign matter left in the water line, and any expenses resulting from this fouling, are not
	the responsibility of the manufacturer.

CONNECTING THE DRAIN LINE: The drain for the JP-24BPNSU is a pumped (pressure) drain capable of pumping waste water to a height of 24 inches from the floor to the kitchen’s drain system. The dishmachine is supplied with a 10 foot long hose that extends from the rear side of the machine. There must also be an air gap between the machine drain line and the floor sink or drain. If a grease trap is required by code, it should have a flow capac- ity of 12 gallons per minute.

WATER SUPPLY CONNECTION: Ensure that you have read the section entitled “PLUMB- ING THE DISHMACHINE” above before proceeding. Install the water supply line (1/2” pipe size minimum) to the dishmachine line strainer using copper pipe. It is recommended that a water shut-off valve be installed in the water line between the main supply and the machine to allow access for service.

The water supply line is to be capable of 20 A5 PSI “flow” pressure at the recommended temperature indicated on the data plate.

In areas where the water pressure fluctuates or is greater than the recommended pressure, it is recommended that a water pressure regulator be installed.

Do not confuse static pressure with flow pressure. Static pressure is the line pressure in a “no flow” condition (all valves and services are closed). Flow pressure is the pressure in the fill line when the fill valve is opened during the cycle.

It is also recommended that a shock absorber (not supplied with the JP-24BPNSU model)

be installed in the incoming water line. This prevents line hammer (hydraulic shock), induced by the solenoid valve as it oper- ates, from causing damage to the equipment.

PLUMBING CHECK: Slowly turn on the water supply to the machine after the incoming fill line and the drain line have been installed. Check for any leaks and repair as required. All leaks must be repaired prior to placing the machine in operation.

JP-24BPNSU Technical Manual

7610-002-38-50 Rev. D (11/11/2005)

JP-24BPNSU specifications

The Jackson JP-24BPNSU is a striking electric guitar that caters to a wide range of musical genres, from rock to metal. Known for its exceptional playability and innovative design, this instrument stands out not only in appearance but also in performance.

At the heart of the JP-24BPNSU is its solid body, which is crafted from high-quality basswood. This lightweight tonewood contributes to the guitar's resonant sound while ensuring comfort during extended playing sessions. With a sleek, contoured design, the body allows for easy reach across the fretboard, making it an ideal choice for players who favor speed and agility.

The guitar features a unique bolt-on maple neck that offers stability and enhances sustain, paired with a rosewood fingerboard for a warm tonal quality. With 24 jumbo frets, the JP-24BPNSU provides ample space for intricate licks and solos, catering to both beginners and advanced players. Its 25.5-inch scale length contributes to a tight, focused sound that is perfect for aggressive playing styles.

One of the standout features of this guitar is its high-output Jackson humbucking pickups. These pickups deliver powerful tones with excellent clarity, making them suitable for various musical styles. They are designed to handle high levels of gain, allowing performers to achieve thick, saturated sounds without muddiness. The JP-24BPNSU also features a versatile three-way pickup selector switch, providing players with options to explore different tonal palettes effortlessly.

In terms of hardware, the guitar comes equipped with a high-quality licensed Floyd Rose tremolo system. This allows for dramatic pitch bending and dive-bombing effects while maintaining tuning stability, which is essential for many modern guitar techniques. The guitar's reliable tuning machines further enhance its performance, ensuring that your instrument stays in tune even after intense playing sessions.

Aesthetically, the Jackson JP-24BPNSU is designed to catch the eye. It often boasts a bold finish combined with striking body contours, making it a visually appealing choice for performers. The cutting-edge craftsmanship and attention to detail not only provide an attractive look but also ensure durability and longevity.

Overall, the Jackson JP-24BPNSU is an ideal electric guitar for musicians seeking a blend of style, tone, and performance. With its range of features and technologies, it is well-suited for both studio work and live performances. Whether you are a beginner or a seasoned player, the JP-24BPNSU offers an exceptional playing experience that is sure to inspire creativity and enhance your musical journey.

Jackson JP-24BPNSU technical manual Drain Hose

Models: JP-24BPNSU

JP-24BPNSU specifications