Hex Nuts & Washers
Replacing the Heater

SECTION 5: SERVICE PROCEDURES

REPLACING THE PUMP MOTOR/REPLACING THE HEATER

REPLACING THE PUMP MOTOR

The following list of tools will be needed to complete this procedure. 5/6” nutdriver, phillips screwdriver, 7/16” socket and ratchet, and 7/16” wrench.

1.Disconnect the electrical power to the dishwasher at the main circuit breaker box when servicing. Place a tag on the cir- cuit box indicating the circuit is being repaired.

2.Disconnect power and conduit from dishmachine terminal block.

3.Turn off the water supply and disconnect the water supply line.

4.Disconnect the dishmachine drain hose from the kitchen’s

drain. Drain the machine of any water at this time.

 

5. Move the machine out and lay machine onto its back.

 

6. Use a 5/16” nutdriver to loosen the hose clamp and remove

8

the pump hose to the drain valve.

 

7. Use a 5/16” nutdriver to loosen the hose clamp and remove

6

the pump hose from the suction casting.

 

8. Use a 5/16” nutdriver to loosen the hose clamp and remove

 

the pump hose from the discharge hub casting.

 

9. Use a 7/16” socket and ratchet, and a 7/16” wrench to

 

remove the drain valve mounting bracket from the motor brack-

 

et.

 

10. Use a 7/16” socket and ratchet to remove the pump motor

 

assembly by loosening the (4) locknuts securing the motor

10

mounting bracket. NOTE: The motor mounting bracket is slot-

9

ted to allow for easy removal and installation. Remove (2) of the

7

locknuts on one side and slide the assembly toward that side

 

and remove. Once the assembly is removed, disconnect the

 

wire leads from the motor wiring box.

 

11. Install replacement motor in reverse order of above.

 

 

Replacing the Pump Motor

REPLACING THE BOOSTER TANK HEATER

The following list of tools will be needed to complete this procedure: phillips screwdriver and 1/2” socket and ratchet.

1.Disconnect the electrical power to the dishwasher at the main circuit breaker box when servicing. Place a tag on the cir- cuit box indicating the circuit is being repaired.

2.Use the phillips screwdriver to remove the two screws from the bottom of the kick panel.

3.Disconnect power and conduit from dishmachine terminal block.

4.Turn off the water supply to the dishmachine.

5.VERY IMPORTANT: Disconnect wire lead (orange/white) from heater contactor coil. Note: Wire is tagged in electrical

panel.

 

6.

Drain water from booster tank.

 

7.

Remove the wires from the heater.

Heater Gasket

8.

Use a 1/2” socket and ratchet to remove the (4) 5/16-18 hex

 

nuts and lock washers. Remove the heater and heater gasket

Heater

from booster tank.

 

8.

Install the replacement heater and gasket, the tighten firmly.

 

9.

Connect wire leads to heater and tighten firmly.

 

10.Turn on water supply and power to dishmachine.

11.Place cycle switch in AUTO position and depress power

switch to ON/FILL position.

12. VERY IMPORTANT: Run the dishmachine through several complete cycles and check water level in wash sump. If there is water in the wash sump, reconnect the wire lead (orange/white) previously removed from the heater contactor coil.

13. Run the dishwasher through several cycles and check to see that rinse and wash temperatures are correct.

JP-24BPNSU Technical Manual

7610-002-38-50 Rev. D (11/11/2005)

22

Page 30
Image 30
Jackson JP-24BPNSU technical manual Replacing the Booster Tank Heater

JP-24BPNSU specifications

The Jackson JP-24BPNSU is a striking electric guitar that caters to a wide range of musical genres, from rock to metal. Known for its exceptional playability and innovative design, this instrument stands out not only in appearance but also in performance.

At the heart of the JP-24BPNSU is its solid body, which is crafted from high-quality basswood. This lightweight tonewood contributes to the guitar's resonant sound while ensuring comfort during extended playing sessions. With a sleek, contoured design, the body allows for easy reach across the fretboard, making it an ideal choice for players who favor speed and agility.

The guitar features a unique bolt-on maple neck that offers stability and enhances sustain, paired with a rosewood fingerboard for a warm tonal quality. With 24 jumbo frets, the JP-24BPNSU provides ample space for intricate licks and solos, catering to both beginners and advanced players. Its 25.5-inch scale length contributes to a tight, focused sound that is perfect for aggressive playing styles.

One of the standout features of this guitar is its high-output Jackson humbucking pickups. These pickups deliver powerful tones with excellent clarity, making them suitable for various musical styles. They are designed to handle high levels of gain, allowing performers to achieve thick, saturated sounds without muddiness. The JP-24BPNSU also features a versatile three-way pickup selector switch, providing players with options to explore different tonal palettes effortlessly.

In terms of hardware, the guitar comes equipped with a high-quality licensed Floyd Rose tremolo system. This allows for dramatic pitch bending and dive-bombing effects while maintaining tuning stability, which is essential for many modern guitar techniques. The guitar's reliable tuning machines further enhance its performance, ensuring that your instrument stays in tune even after intense playing sessions.

Aesthetically, the Jackson JP-24BPNSU is designed to catch the eye. It often boasts a bold finish combined with striking body contours, making it a visually appealing choice for performers. The cutting-edge craftsmanship and attention to detail not only provide an attractive look but also ensure durability and longevity.

Overall, the Jackson JP-24BPNSU is an ideal electric guitar for musicians seeking a blend of style, tone, and performance. With its range of features and technologies, it is well-suited for both studio work and live performances. Whether you are a beginner or a seasoned player, the JP-24BPNSU offers an exceptional playing experience that is sure to inspire creativity and enhance your musical journey.