www.jacksonmsc.com
Jackson glasswasher machines come equipped with heaters to ensure proper ware washing results. Occasionally, some of these components may need replacing to maintain opti- mum performance.
Jackson offers all of the repair parts necessary for per- forming this task.
The instructions provided here are for maintenance per- sonnel only. Unauthorized persons should not attempt any of the steps contained in these instructions.
Warning: many of the instructions and steps within this document require the use of tools. Only authorized per- sonnel should ever perform any maintenance procedure on the dishmachine!
PREPARATION
1.Power must be secured to the unit at the service break- er. Tag or lock out the service breaker to prevent accidental or unauthorized energizing of the machine.
2.Ensure that incoming water to the machine is secured either by use of a
3.The unit must be drained completely with the drain stopper removed.
TOOLS REQUIRED
The following tools will be needed to perform this mainte- nance evolution:
1.3/8” Nutdriver
2.Ratchet
3.1/2” Socket
4.3/8” Socket
5.Torgue Wrench
6.Amp Meter
TIME REQUIRED
It is estimated that it will take (1) person thirty minutes to perform this task, not including all of the items indicated in the sec- tion entitled “PREPARATION”.
IMPORTANT NOTES
STEPS
1.Remove the front door.
2.Remove the heater box cover with the 3/8” nutdriver to expose the heater. Set the cover and hardware to the side.
Removing the heater cover.
3. Remove the lower strainer.
Removing the lower strainer.
1.Read these instructions thoroughly before attempting this maintenance task. Become familiar with the parts and what actions need to be taken. This will save time in the long run!
4.Remove the upper (wash) strainer as well. Set both strainers to the side where they will not be damaged or present a trip hazard.
2 | Heater Replacement Instructions | |
Revision A (09/23/2005) | ||
|
