![](/images/new-backgrounds/1069398/69398103x1.webp)
SECTION 5: PARTS SECTION
TEMPSTAR INCOMING PLUMBING/OUTLET PLUMBING ASSEMBLY/WPRK KIT OPTION
ITEM | QTY | DESCRIPTION | Mfg. No. |
1 | 1 | Water Pressure Regulator, 3/4" NPT | |
2 | 1 | Valve, Ball, 1/4" NPT | |
3 | 1 | Gauge, Pressure, | |
4 | 2 | Nipple, Close, 3/4" NPT | |
5 | 1 | Tee, Brass, 3/4" NPT x 3/4" NPT x 1/4" NPT | |
6 | 1 | Valve, Solenoid, 3/4" NPT | |
7 | 1 | Nipple, Brass, 3/4" NPT x 2" Long | |
8 | 1 | Elbow, 3/4" NPT, Brass, Street | |
9 | 3 | Union, 3/4" NPT, Brass | |
|
| ||
10 | 6 | Adapter, 3/4" Male | |
11 | 1 | Tube, Copper | See Chart |
12 | 2 | Elbow, 3/4" CU x CU, 90° | |
13 | 2 | Adapter, 3/4", | |
14 | 1 | Tube, Copper | See Chart |
15 | 1 | Vacuum Breaker, 3/4" NPT | |
16 | 1 | Tube, Copper | See Chart |
17 | 1 | Elbow, 3/4" NPT, 90°, Brass | |
18 | 1 | Tube, Copper | See Chart |
When servicing plumbing components, take care not to damage the threads of each individual item. Damaged threads can cause leaks and loss of pressure, which could adversely effect the performance of the Tempstar dishmachine. It is strongly rec- ommended that teflon thread tape, used in conservative amounts, be applied to threads when joining components together. It is not advised to use thread sealing compounds, sometimes referred to as “pipe dope”. Compounds can be ejected from the threads during the tightening process and become lodged in key components, thereby rendering them useless. Some of the components include the solenoid valve and the pressure gauge isolation ball valve.
WPRK KIT OPTION
Water Arrestor, 1/2” 06685-100-05-00
Tee, 3/4” x 3/4” x 1/2” 04730-211-06-00
Nipple, 3/4” NPT, Close, Brass
Tempstar LT/NB/S/SDS Technical Manual
Issued:
44