Step 9
Peel protective backing from the four adhesive bumpers and stick to top and bottom of the panel recess in the wall jambs. Lift the interior panel into position with the rollers engaging the roller slot in the header and the bottom fin inserted into the interior slot of the bath track. Repeat for the exterior panel. The vertical vinyl wiper blade of the interior panel should seal against the exterior panel when both panels are in a closed position.
If the panels are not parallel to the wall jambs, remove the doors and adjust the rollers up or down to compensate.
Step 10
Press the trim ring over the base of the four acrylic towel bar brackets and press the brackets into the ends of the towel bars. Attach the assembled towel bars to the glass panels with four
Step 11
Caulk the ends of the bath track and the interior surface of the wall jambs
Step 12
Clean your Steam Enclosure with a soft cloth and nonabrasive cleaner.
Q
N
Q
O
N
O
P
5
