CV-M50IR
10. Specifications
Scanning system | CCIR 625 lines | EIA 525 lines |
| 25 frames/sec. | 30 frames/sec. |
CCD sensor | Monochrome 1/2" Hyper HAD IT CCD | |
Sensing area | 6.6 mm (h) x 4.8 mm (v) | |
Effective pixels | 752 (h) x 582 (v) | 768 (h) x 494 (v) |
Elements in video output | 737 (h) x 575 (v) | 758 (h) x 486 (v) |
Cell size | 8.6 (h) x 8.3 (v) µm | 8.4 (h) x 9.8 (v) µm |
Resolution (horizontal) | 560 TV lines | 570 TV lines |
Resolution (vertical) | 575 TV lines | 485 TV lines |
Sensitivity on sensor |
| 0.01 lx |
S/N ratio | >59 dB (AGC off, Gamma 1) | |
Video output | Composite VS signal 1.0 Vpp, 75 Ohm | |
Gamma |
| 0.45 – 1.0 |
Gain | Manual – Automatic. 0 to +15 dB by potentiometer or AGC | |
Scanning | 2:1 interlace – | |
Accumulation |
| Field – frame |
Synchronization | Int. | |
HD sync. input/output |
| 4V, 75 Ohm* |
VD sync. input/output |
| 4V, 75 Ohm* |
Trigger input |
| 4V, 75 Ohm* |
Trigger input duration |
| >HD interval |
WEN output (write enable) |
| 4V, 75 Ohm |
EEN output (exposure enable) |
| 4V, 75 Ohm |
Pixel clock output (optional) |
| 4V, 75 Ohm sine |
Normal shutter | Off, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4500, 1/10,000 sec. | |
Edge | 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4500, 1/10,000 sec. | |
Pulse width controlled shutter | >1 H (64 usec.) to <60 msec. | |
Start/stop trigger shutter | 1/77 sec to 1/10,000 sec. | |
Long time exposure | 1 field to ∞. Duration between ext. VD pulses | |
Operating temperature |
| |
Humidity | 20 – 80% | |
Storage temp./humidity | ||
Power |
| 12V DC ±10%. 2.5W |
Lens mount |
| |
Dimensions | 40 x 50 x 80 mm (HxWxD) | |
Mass |
| 230 g |
*HD sync., VD sync./(Trigger) input or output by internal jumpers. Factory setting: HD/VD input. Inputs TTL or 75 Ohm terminated by internal jumpers. Factory setting: 75 Ohm terminated.
Note: Above specifications are subject to change without notice.
10.1. Spectral Sensitivity
Relative response
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
400 500 600 700 800 900 1000
Wave length (nm)
- 20 -
