JAI CV-M50IR operation manual Locations and Functions

CV-M50IR

4. Locations and Functions

11/2" interline transfer CCD sensor.

2Lens mount of C-mount type. *1)

3BNC connector for video output.

4Switch block SW1 for shutter speed and function modes setting.

56-pin multi connector for WEN and EEN output external trigger input.

612-pin multi connector for +12V DC power, video output and HD/VD input/output.

7GAIN potentiometer for manual gain adjustment.

8Screw holes for Tripod mount plate.

9Tripod mount plate to place the camera on tripod.

Note: *1) Rear protrusion on C-mount lens must be less than 10.0 mm (0.4 inches approx.). When IR-cut filter is used, it must be less than 7.0 mm (0.28 inches approx.).

The IR cut filter is placed in the C-mount thread.

The C-mount 25 mm IR cut filter must be ordered separately.

- 4 -