JAI CV-M532 operation manual Specifications, Spectral Sensitivity

CV-M532

10. Specifications

Scanning system	EIA 525 lines
	30 frames/sec.
CCD sensor	Monochrome "1/3" Hyper HAD IT CCD
Sensing area	4.9 mm (h) x 3.7 mm (v)
Effective pixels	768 (h) x 494 (v)
Elements in video output	758 (h) x 486 (v)
Cell size	6.35 (h) x 7.4 (v) µm
Resolution (horizontal)	570 TV lines
Resolution (vertical)	485 TV lines
Sensitivity on sensor	0.2 lx
S/N ratio	>56 dB (AGC off, Gamma 1)
Video output	Composite VS signal 1.0 Vpp, 75 Ohm
Gamma	0.45 or 1.0
Gain	Manual – Automatic. 0 to +15 dB by potentiometer or AGC
Scanning	2:1 interlace – non-interlace
Accumulation	Field – frame
Synchronization	Int. X-tal. Ext HD/VD or random trigger
HD sync. input/output	4V, 75 Ohm*
VD sync. input/output	4V, 75 Ohm*
Trigger input	4V, 75 Ohm*
Trigger input duration	>64 µsec to <1 msec.
WEN output (write enable)	4V, 75 Ohm
EEN output (exposure enable)	4V, 75 Ohm
Pixel clock output (optional)	4V, 75 Ohm sine
Normal shutter	Off, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4500, 1/10,000 sec.
Edge pre-select shutter	1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000, 1/4500, 1/10,000 sec.
Pulse width controlled shutter	>1 H (64 µsec.) to <60 msec.
Start/stop trigger shutter	1/77 sec to 1/10,000 sec.
Long time exposure	1 field to ∞. Duration between ext. VD pulses
Operating temperature	-5°C to +45°C
Humidity	20 – 80% non-condensing
Storage temp./humidity	-25°C to 60°C/20 - 90%
Power	12V DC ±10%. 3.7W
Lens mount	M10.5 x 0.5
Dimensions (camera Head)	ø12x 50 mm
Mass	230 g

*HD sync., VD sync./(Trigger) input or output by internal jumpers. Factory setting: HD/VD input. Inputs TTL or 75 Ohm terminated by internal jumpers. Factory setting: 75 Ohm terminated.

Note: Above specifications are subject to change without notice.

10.1. Spectral Sensitivity

	1.0
response	0.8
	0.6
Relative	0.4
	0.2
	0.0
	400	500	600	700	800	900	1000

Wave length (nm)

- 21 -