External Appearance, Ccu, Head | JAI CV-M532 instruction

CV-M532

9. External Appearance

Unit : mm (inches)

9.1 CCU

	(0.24)6	(150.97)
	02)
	26
	(1.
9.2 HEAD	(0.419).	(02.08)50
	77..3050.2in.2inglairss	(1.97)
	M10.5x0.5	HR10A-10TP-12P
		(0.18)
		.6
	0 .47) (	Cable:4
	12

- 20 -

Image 21

JAI CV-M532 operation manual External Appearance, Ccu, Head

Contents

CV-M532 Declaration of Conformity Table of Contents Standard Composition General Main Features Locations and Functions Pin Multi-connector DC-IN/SYNC Pin AssignmentType HR10A-7R-6PB Hirose male Seen from rear Normal Shutter Mode Input/Output of HD/VD SignalExternal Trigger Mode Functions and Operations Edge pre-select mode for non-interlace only EIA Non-interlaced / Field accumulation mode Pulse Width Control Mode Pulse width control mode for non-interlace only Start/Stop Trigger Mode CV-M532 EIA Long Time Exposure Mode CV-M532 Mode Setting Table for SW 1 SettingTable for Shutter Time SW2 on PK8057 Board Pixel Clock Output Jumper Settings Location of SW2 and Jumpers Board PK8054 Side BBoard PK8057 Side a VR4 VR3 VR5 Adjustment of Video Signal Output Level External Appearance CCUHead Spectral Sensitivity Specifications Precautions Typical CCD CharacteristicsAppendix User’s Record Users Mode Settings Users ModificationsCamera type CV-M532 Scanning system Revision Revision E Serial No