JAI CV-M536, CV-M539, CV-M538 operation manual Table of Contents

CV-M536/538/539

Table of Contents

Table of Contents			.......................................................................................................................................	2
1.	General			3
2.	Standard Composition			3
3.	Main Features			4
4.	Locations and Functions			5
	4.1.	CCU		5
	4.2.	HEAD		5
5.	Pin Assignment			6
	5.1.	12-pin Multi-connector (DC-IN/SYNC.)		6
	5.2.	6-pin Multi-connector (TRIGGER)		6
6.	Functions and Operations			7
	6.1.	Input/Output of HD/VD Signal		7
		6.1.1. Input of External HD/VD Signal		7
		6.1.2. Output of Internal HD/VD Signal		7
	6.2.	Normal Shutter Mode		7
	6.3.	External Trigger Mode		7
		6.3.1.	Edge Pre-select Mode	7
		6.3.2. Pulse Width Control Mode		9
		6.3.3.	Start/Stop Trigger Mode	11
		6.3.4. Long Time Exposure Mode		13
7.	Mode Setting		......................................................................................................................................	15
		7.1.1. SW1 Switch on the Rear Panel		15
		7.1.2. Table for SW 1 Setting		15
		7.1.3. Table for Shutter Time		15
		7.1.4. Ext. Trigger Shutter Mode		16
		7.1.5.	Trigger Select	16
		7.1.6.	CD Accumulation	16
		7.1.7.	Scanning System	16
		7.1.8.	Gamma Correction	16
		7.1.9.	Gain Control	16
	7.2. SW2 on PK8057 Board			16
	7.3.	Jumper Settings		17
		7.3.1. Jumper on PK8054 Board		17
		7.3.2. Jumper on PK8057 Board		17
		7.3.3.	Pixel Clock Output	17
	7.4.	Location of SW2 and Jumpers		18
		7.4.1. Board PK8054 Side B		18
		7.4.2. Board PK8057 Side A		18
8.	Adjustment of Video Signal Output Level			19
9.	External Appearance			20
	9.1.	CCU		20
	9.2.	HEAD		20
10.	Specifications			21
	10.1.	Spectral Sensitivity		21
11.	Appendix			22
	11.1.	Precautions		22
	11.2.	Typical CCD Characteristics		22
12.	User’s Record			23

- 2 -