JAI CV-M539, CV-M536 Pin Assignment, Pin Multi-connector DC-IN/SYNC, Pin Multi-connector Trigger

CV-M536/538/539

5. Pin Assignment

5.1.12-pin Multi-connector (DC-IN/SYNC.)

Type: HR10A-10R-12PB (Hirose) male Seen from rear.

Pin1no.	Signal	Remarks
5	GND	ParallelwiththeBNCvideooutput.Avoiddoubletermination.
423	+12VideoDCinput
67	HDVinput/output	HDVinasfactorysetting.*1)*2)
8	+12VGNDNCDCinput	NCasfactorysetting.Pixelclockoutput.*1)
1290

Notes:

*1) Signals on pin no. 6, 7 and 9 can be changed by jumper setting. See “7.3. Jumper Settings” for more information.

*2) In Edge Pre-select and Pulse Width Control mode do not input ext. VD signal.

5.2.6-pin Multi-connector (TRIGGER)

Type: HR10A-7R-6PB (Hirose) male

Seen from rear.	Pin4231no.	EENSignalGNDNCNCoutput	*Note	Remarks
	65	ExtWEN.Trigoutputinput	*Note

* Notes:

The functions available on the 6-pin multi-connector are not effective in long time exposure mode.

- 6 -