Jasco 19200 installation instructions Setting The House Security Code Setting

and 9=off.)

3. Select the desired chime sound from the table below.

Chime Sound Table
Position	7	8	9
Westminster	ON	OFF	OFF
Ding Dong	OFF	ON	OFF
Knock	OFF	OFF	ON
Bronze Chime	ON	ON	OFF
Cuckoo Clock	ON	OFF	ON
Foghorn	OFF	ON	ON
Gong	ON	ON	ON

ON: Add a jumper to a location

OFF: Remove jumper from a location.

4.Remove or add the jumpers to match the table.

5.Store unused jumpers as shown.

Parking the jumper on an open set of pins. The two jumpers on the left are in the parked position.

Setting The House Security Code Setting

The House Security Code is pre-set at the factory and no further adjustment is normally required. However, if you experience erratic or no operation from your chime you may want to reset the House Security Code Setting.