Jasco 86597 owner manual Please Read this Information, Easy HOOK-UP

PLEASE READ THIS INFORMATION

Thank you for purchasing the Wireless Phone Jack System. Enclosed you will find:

1 - Base unit (two phone connectors on the right side)

1 - Extension unit (single phone connector on the right side)

1- Six-foot phone cord

1- Owner’s manual

Note:

•Do not plug base or extension unit into surge protectors, plug strips, extension cords, other AC-power extension devices or GFCI-protected outlets

•Phone connected to extension unit will not operate during a power failure

•Phone jacks can only be used for one phone line

•Follow installation procedure specifically as detailed in the owner’s manual

•If you lose dial tone or a phone connection, unplug and reset your units as detailed in the Troubleshooting section on the next page

EASY HOOK-UP

1.Plug the base unit (two phone connectors on right side) into an AC outlet; the indicator light on the base unit will illuminate red. Next, connect the base unit to an existing phone jack using six-foot phone cord (included); then connect the phone to the unused connector on the base unit.

Wall Outlet

Wall Jack

Base Unit

2.Plug the extension unit (single phone connector on right side) into an AC outlet where connection is needed. The indicator light on the extension unit will blink red. As soon as it recognizes the base unit, the indicator light will then illuminate green; the indicator light on the base unit will also illuminate green, after it recognizes the extension unit.

Wall Outlet

Extension	Trouble Shooting
	On Reverse Side