5. Installation Instructions
Please keep this user’s manual in a safe place.
1.Unplug your current keyboard and mouse.
2.Plug the Nano Receiver into the correct port on your PC.
3.Install the included batteries into the battery compartments located on the bottom of your keyboard (2 AAA) and mouse (2 AAA). Make sure the polarity corresponds to the symbols in the battery compart-
ment.
4.Place the keyboard and mouse where you intend to use them within 26 feet (8m) of the receiver.
5.Turn on the mouse power (which is located on the bottom
of the mouse); the mouse will connect with the receiver immediately. If the cursor is not moving, please pull and plug the receiver again.
6.Click any keyboard key to get connected with the receiver. If there is no key response, please pull and plug the receiver again.
CAUTION
Batteries may leak harmful liquids or ignitable materials or explode causing injury and product damage.
•Do not mix old and new or other battery types.
•Replace all batteries at the same time.
•Replace fully discharged batteries immediately.
WARNING
Continuous use of any keyboard may cause injury to hands, wrists, arms, neck or back. If you feel ache, numbness or weakness in these areas, consult a qualified health professional.
TO REDUCE THE RISK OF SUCH INJUIRIES FOLLOW THESE PRECAUTIONS:
•Position Yourself: Choose a chair that provides support for your lower back. Adjust your work surface height and your chair to assume a comfortable and natural body posture.
•Go Lightly: Type with a light touch, keeping your hands and fingers relaxed. Avoid resting your palms or your wrists on any type of surface while typing. Don’t rest on edges, such as the edge of your desk.
•Take Breaks: Take frequent short breaks. Get up and walk around at least a couple of times every hour. Adjust your chair so the seat does not press in to the back of your knees.
pg.4
