Programming For VCR
1.Manually turn on the VCR.
2.Press and hold the SETUP button until the INDICATOR LIGHT lights, then release the SETUP button.
3.Press and release the VCR button (the
INDICATOR LIGHT will blink then remain lit).
4.Find the three digit code for your VCR in the code list and enter it using the Number Buttons. After your code is entered, the INDICATOR
LIGHT will turn off.
5.Aim the remote at your VCR and press the ON•OFF button.
Your VCR should turn off.
Note: If your VCR does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 8.
6.With your VCR on, press CH+. If the VCR responds, no further programming
is required.
7.Enter your code
here for easy reference.
5
