Programming With Code Search
If your TV, VCR, DVD.CD player, satel- lite receiver, or Cable Box does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following the steps below.
1.Turn on the device you wish to program.
2.Press and hold SETUP until the INDICATOR LIGHT lights, then release SETUP.
3.Press and release the device button for the device you are programming. The
INDICATOR LIGHT will blink once then remain lit.
4.Press and release ON•OFF until your device turns off.
Important: You may have to press ON•OFF up to 200 times.
5.When your device turns off, press the ENTER button, the
INDICATOR LIGHT will go off.
8
