Jasco RM24945 instruction manual Button Functions

Button Functions

Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G. PREV.CH may be called RECALL, or CLEAR may be called EXIT. These differences depend on the brand and model of your product. Also, this remote can only operate features that exist on your product. E.G., your product must have previous channel ability for the PREV.CH button to operate this feature.

GUIDE displays	TV, VCR, etc.	Red Indicator
satellite or cable	Selects product to	Lights when any
on-screen	be operated.	button is pressed.
program guide.

MENU-PROG Brings up the main menu. If you are ready in the menu system, press SELECT to select a highlighted choice. Use the arrow buttons to move through the menu selections.

MUTE Turns off the TV sound while the picture remains.

VOLUME UP/DOWN Changes the volume level of the product, normally the TV.

CODE SEARCH For setup.

0-9

Enter numbers for direct channel selection. Some products require ENTER to be pressed after channel selection.

ENTER For some TV models, used after direct channel number entry to immediately change to the selected channel.

PIP, SWAP, INPUT. PIP and SWAP operate your TV’s Picture-in-Picture features. INPUT selects the video input of your TV.

4

Button Functions, cont.

ON•OFF Turns	Navigation buttons and
product On or Off.	SELECT used to move
	through on-screen
	menuing and guides. With
	some DBS models the DISP
	button should be used to
	select the highlighted item.
	Use the navigation buttons
	to move the highlighted
	choice up, down, left, or
	right.
	DISP Display button
	shows date and time if
	your TV or VCR has
	that feature.
	CLEAR Removes the
	on screen display to
	return to normal
	viewing.
	PREV.CH Returns to
	the previously selected
	channel.
	CHANNEL Up/Down
	Changes the channels
	TRACK +/- controls DVD/
	CD track selection i.e. DVD/
	CD Track Skip Up/Down (in
	DVD and CD modes).
	TV/VCR Operates the
	same as the TV/VCR or
	antenna keys on your
	original remotes.
	SLEEP enables the remote
	to turn off your TV after a
	period of 1 to 99 minutes.

RECORD, PLAY, STOP, REW, FF, PAUSE VCR control buttons operate your VCR even when the remote is set to operate the TV. Also operates DVD Scan -/+. Note the VCR keys also control similar functions of your DVD player when in DVD Mode.

Note: The REC button must be pressed TWICE to record from your VCR. For some brands of VCRs, you might need to press the REC button once, then press it again for three seconds.

5